It looks like you're in a different country Change site ?
Closer To Nature Bottle Support

Support details

Advanced Electric Steriliser and Dryer

  • Getting Started
  • Getting Started

    How do I set up my electric steriliser and dryer?

    Place your steriliser and dryer on a level work surface, making sure there’s nothing underneath it and that the rubber pads are touching the surface.

    You must insert the filter provided into the steriliser base before you start using it.

    How do I use my electric steriliser and dryer?

    Remove the lid and racks from your steriliser’s base. Pour 120ml of water onto the stainless steel heater surface. Do not go over the maximum fill line. If you only want to use the drying function, you don’t need to add any water.

    Place the lower rack back into the base and place clean bottles with their opening facing downwards onto the lower posts. Place bottle hoods on the bottle bases.

    Insert the upper rack and place bottle accessories including teats and screw rings inside.

    Place the lid back on top, making sure that it fits securely onto the upper rack without any gaps.

    Plug your steriliser into a power outlet. Press the on/off button. You will hear a beep and the button will light up. Choose the setting you want to use.

    Once the steriliser and dryer has completed its cycle allow it to cool for at least 5 minutes before you open it.

    After each use pour away any remaining water in the base by tipping it sideways over a sink, making sure that no water gets into the air vent and wipe clean with a damp cloth.

    What are the different functions I can use on my steriliser dryer?

    Your steriliser and dryer has three different functions – auto sterilise and dry, sterilise only and dry only.

    Sterilise and dry baby bottles and feeding accessories

    Press the Auto button once. You will hear a beep and the sterilisation cycle will start. This will take approximately 10 minutes.

    Once the sterilising cycle has finished, the drying cycle will automatically follow. The drying time is approximately 30 minutes.

    Once the drying cycle is complete, you will hear 5 beeps and your steriliser and dryer will automatically switch off. Please allow it to cool for at least 5 minutes before you open it.

    Sterilise only

    Press the sterilise button once. You will hear a beep and the sterilisation cycle will start. This will take approximately 10 minutes.

    Once the sterilising cycle is complete, you will hear 5 beeps and your steriliser and dryer will automatically switch off. Please allow it to cool for at least 5 minutes before you open it.

    Dry only

    Press the dry button once. You will hear a beep and the drying cycle will start. This will take approximately 30 minutes.

    Once the drying cycle is complete, you will hear 5 beeps and your steriliser and dryer will automatically switch off. Please allow it to cool for at least 5 minutes before you open it.

  • Cleaning & Maintenance
  • Cleaning and maintenance

    How do I clean my electric steriliser and dryer?

    Unplug your electric steriliser and dryer and allow to cool before cleaning.

    After each use pour away any remaining water in the base by tipping it sideways over a sink, making sure that no water gets into the air vent and wipe clean with a damp cloth.

    You can clean the lid and two racks with hot water. Do not clean any part of your steriliser with abrasive cleaners.

    How do I replace the filter in my electric steriliser and dryer?

    We recommend that you replace the filter in your electric steriliser and dryer every 6 months.

    To change the filter:

    ·         Unclip the filter panel door on the underside of the base and remove the old filter.

    ·         Place a new filter into the base, making sure that the tab handle is still visible on top of the filter.

    ·         Clip the filter panel door back into place.

    How often do I need to descale my electric steriliser and dryer?

    It depends on how hard or soft your water is.

    For hard water areas, we recommend descaling every 14 days

    For medium water areas, we recommend descaling every 21 days.

    For soft water areas, we recommend descaling every 28 days.

    You can find out your water quality from your water provider.

    How do I descale my electric steriliser and dryer?

    Unplug your electric steriliser and dryer and allow to cool before descaling.

    Use a descaler that is suitable for use with stainless steel and use according to the manufacturer’s guidelines. Or you can use white vinegar or a descaling sachet according to the manufacturer’s guidelines.

    If there is no method stated in the manufacturer’s guidelines use a ratio of 1:4 descaler to water.

  • Troubleshooting
  • Troubleshooting

    Help my electric steriliser and dryer won’t start

    Make sure the plug is securely inserted into the power outlet and the power is turned on.

    Press the on/off button before selecting the function you want to use.

    Help there’s scaling on the stainless steel base. What can I do?

    Your electric steriliser and dryer may have limescale. Follow the instruction to descale it.

    Why am I getting white marks on my baby’s bottles?

    Your electric steriliser and dryer may have limescale. Follow the instruction to descale it.

    Still looking for an answer?

    Get in touch

    CONTACT US

    Still looking for an answer?

    Get in touch

    *Calls are free from UK landlines and mobiles **International calls will be charged at your network provider’s international rates
    Lines are open 9am-9pm Monday to Friday and 9am-12pm on Saturday’s