Support StayPut Pocket™

Getting Started

Parts Guide

What's in the box?

• X1 Sterilizer pod  

• X1 StayPut Pocket™ pacifier holder

• X1 Ultra-Light StayPut pacifier 0-6 months

Before First Use

Place the pacifier and part B of the StayPut Pocket™ in boiling water for 5 minutes. Allow to cool and squeeze out any trapped water from the pacifier to ensure hygiene.

How to Fit

1. After cleaning and sterilizing the StayPut Pocket™, make sure it’s dry and dust-free.
2. Remove the adhesive strip from the back of part A.
3. Apply part A centrally to the phone case, ensuring the central locking circle is positioned horizontally and press firmly for 5-10 seconds.
4. Align part B with part A and twist 90° in an anticlockwise direction until secured. 
5. Place your Ultra-light StayPut 0-6 month pacifier in the StayPut Pocket™ and press on either side to secure.

Cleaning and Maintenance

How to Clean with the Sterilizer Pod

1. Add water to one half of the sterilizer pod so that the water level sits between the two black lines, and place one or two pacifiers or one pacifier and the StayPut Pocket™ part B inside.
2. Close the sterilizer pod, noting a locking click in each corner.
3. Ensure the microwave heat place is clean. Microwave on high power (750-1000w) for 4 minutes. 
4. After microwaving, allow to cool. Be aware that the contents may still be hot. 
5. Carefully remove the sterilizer pod, pour out any remaining water, and close it securely. 
6. Check that the pacifier and StayPut Pocket™ have cooled before use.

How to Clean without the Sterilizer Pod

1. Wash the Ultra-light StayPut pacifier and the StayPut Pocket™ in warm soapy water 
2. Rinse in clean water or use a dishwasher (top shelf only).
3. Remove any water that may have entered the teat by squeezing the teat.

The Ultra-light StayPut pacifier and StayPut Pocket™ part B is suitable for sterilization by steam (electric and microwave), boiling or cold-water tablet/liquid solution.