NightGlow Pod UV Charger and Steriliser 

Wash all items to be charged / sterilised in warm, soapy water. Rinse thoroughly and allow to dry completely before placing them in the pod.

The pod can be powered by either: 

• Connecting the provided USB-C cable

• Inserting x3 AA lithium batteries (up to 85 cycles)

To power: Plug the pod into a household power outlet using the included USB-C cable or use x3 AA lithium batteries* for wire-free use on-the-go. 

• Please note, the USB cable does not recharge the batteries or the pod for on-the-go use. 

*Not suitable for rechargeable batteries. Batteries not included.

1. Place one soother inside the NightGlow Pod.
2. Close the lid.
3. Press the start button on the front of the pod and hold for 2 seconds. The button will illuminate to indicate that the charging and sterilisation process has begun.
4. The cycle will take 2 minutes.
5. Open the lid to retrieve your soother.

Your soother is now sterilised and ready for use. If you are using a NightGlow soother, the soft glow will last for up to 9 hours*. A sterilised soother will remain sterile for up to 24 hours if the lid of the pod remains closed.

*Tommee Tippee NightGlow styles after a 2-minute charge. Other brands may vary. 

Surface wash only, wipe exterior clean with a damp cloth and interior clean with a dry cloth. Gently wipe the surface of UV light covers with a dry microfibre cloth, taking care to not scratch.

Warnings:

• Do not submerge in water. Not suitable for steam, microwave or boiling sterilisation.

• Not suitable for dishwashing.

• Avoid harsh chemicals – do not use alcohol, bleach, or abrasive cleaners on the device, as they may damage the UV coating or sensors.

Indication of low battery:
If the light on the front of your NightGlow Pod begins flashing, it indicates that the batteries are low and require replacement.

1. Open the battery cover. Carefully slide the battery cover towards the strap until you hear a click. This will release the cover for removal.
2. Replace the 3 AA lithium batteries with 3 new ones. For best performance use LR6/AA/HR6 batteries. Not suitable for rechargeable batteries.
3. Reattach the battery cover. Align the battery cover with the unit and slide it back into place until you hear a click.

The Tommee Tippee NightGlow Pod uses UV-C light to kill up to 99.9% of germs and bacteria on soothers, bottle teats and other small baby accessories in just 2 minutes. It also uses UV-A light to charge glow in the dark dummies, so they glow gently through the night.

The pod can hold 2 soothers, but for best results and to ensure a 99.9% bacteria kill rate, only 1 should be sterilised at a time.

Yes. UV-C sterilisation is a safe, chemical-free, and heat-free method widely used in healthcare settings. It leaves no harmful residues.

A single sterilisation/charging cycle takes just 2 minutes.

Yes. The pod can sterilise small baby items like bottle teats and teething toys (excluding water-filled or soft toys), as well as small personal items like keys.

No. The sterilisation process works without water, steam, or chemicals. Just place the item inside and start the cycle.

To power: Plug the pod into a household power outlet using the included USB-C cable or use x3 AA lithium batteries* for wire-free use on-the-go. 

• Please note, the USB cable does not recharge the batteries or the pod for on-the-go use. 

*Not suitable for rechargeable batteries. Batteries not included.

Direct exposure to UV-C light can be harmful, but the NightGlow Pod is designed with safety features such as automatic shut off when the lid is opened to ensure it's safe to use.

You can use the pod as often as needed, especially when soothers or accessories have been dropped or exposed to germs.

Yes. Wipe the inside of the pod occasionally with a dry, soft cloth to remove dust or debris. Do not use water or cleaning chemicals.

Absolutely! It's compact and ideal for on-the-go sterilisation and charging.

No. Always wash and dry soothers or items before placing them in the pod to be sterilised or charged.

The UV-C and UV-A LEDs are built to last thousands of hours. If the pod stops working, check the batteries first.

No. Items should be dry before being placed in the pod, as moisture may reduce sterilisation effectiveness.

Yes. Always wash and dry soothers before sterilising/charging for the best results.

Yes. The pod is designed to charge any NightGlow soother, making them glow in the dark for simpler nighttime soothing.

NightGlow soothers charge in just 2 minutes, and then glow throughout the night.

Yes. The pod allows simultaneous sterilisation and charging, so your NightGlow soother is always clean and ready to glow.

Yes. The pod is suitable for sterilising all types of soothers, including those made from latex.

Only NightGlow soothers can be charged, as they are designed to glow in the dark.

A flashing light indicates the battery is low and should be replaced.

No, the pod is not rechargeable. It must be powered using the provided USB-C cable plugged into the main power supply/socketor with x3 AA batteries (lithium recommended). Rechargeable AA batteries are not supported.