Product Support

Support NightGlow Pod UV Charger and Steriliser

Getting Started

Before first use

Wash all items to be charged / sterilised in warm, soapy water. Rinse thoroughly and allow to dry completely before placing them in the pod.

Powering the NightGlow Pod 

The pod can be powered by either: 

  • Connecting the provided USB-C cable
  • Inserting x3 AA lithium batteries (up to 85 cycles)

To power: Plug the pod into a household power outlet using the included USB-C cable or use x3 AA lithium batteries* for wire-free use on-the-go. 

  • Please note, the USB cable does not recharge the batteries or the pod for on-the-go use.

*Not suitable for rechargeable batteries. Batteries not included.

How to use

  1. Place one soother inside the NightGlow Pod.
  2. Close the lid.
  3. Press the start button on the front of the pod and hold for 2 seconds. The button will illuminate to indicate that the charging and sterilisation process has begun.
  4. The cycle will take 2 minutes.
  5. Open the lid to retrieve your soother.

Your soother is now sterilised and ready for use. If you are using a NightGlow soother, the soft glow will last for up to 9 hours*. A sterilised soother will remain sterile for up to 24 hours if the lid of the pod remains closed.

*Tommee Tippee NightGlow styles after a 2-minute charge. Other brands may vary. 

Cleaning and maintenance

Cleaning instructions

Surface wash only, wipe exterior clean with a damp cloth and interior clean with a dry cloth. Gently wipe the surface of UV light covers with a dry microfibre cloth, taking care to not scratch.

Warnings:

  • Do not submerge in water. Not suitable for steam, microwave or boiling sterilisation.
  • Not suitable for dishwashing.
  • Avoid harsh chemicals – do not use alcohol, bleach, or abrasive cleaners on the device, as they may damage the UV coating or sensors.

Battery replacement 

Indication of low battery:
If the light on the front of your NightGlow Pod begins flashing, it indicates that the batteries are low and require replacement.

  1. Open the battery cover. Carefully slide the battery cover towards the strap until you hear a click. This will release the cover for removal.
  2. Replace the 3 AA lithium batteries with 3 new ones. For best performance use LR6/AA/HR6 batteries. Not suitable for rechargeable batteries.
  3. Reattach the battery cover. Align the battery cover with the unit and slide it back into place until you hear a click.

Still need help?

If you’re still looking for an answer, get in touch with us here