Thank you for purchasing a Tommee Tippee Quick Chop Mini Food Blender. This product support page is here to help you learn how to use, clean and care for your blender, and to help with any queries you may have.
Always disconnect the appliance from the electricity supply if it’s left unattended and before assembling, disassembling or cleaning. And switch off the appliance and disconnect from supply before changing accessories or touching parts that move when the blender is in use.
Top Push Button
Motor unit
Bowl lid
Silicone sealing ring
Blender blade
Glass Bowl
Non-slip silicone base
1. Slide the knife blade down over the shaft. WARNING! Handle the knife blade carefully as it is extremely sharp.
2. Stretch and attach the silicone sealing ring around the outside of the bowl lid. Make sure the flat side sits against the lid.
3. Insert the lid with the sealing ring into the bowl. Make sure to press firmly to make sure the lid is sealed correctly.
4. Lift the motor unit and place on top of the bowl with the lid. Turn until it drops into place.
WARNING! The motor unit does not attach to the glass bowl, please ensure you hold and lift the blender with both hands when handling or moving the blender.
How to assemble
1. Remove the lid and place the food in the bowl. Do not fill the unit past the '200 ml'. This appliance is intended for processing small quantities of food.
2. Insert the lid with the sealing ring into the bowl. Make sure to press firmly to make sure the lid is sealed correctly.
3. Lift the motor unit and place on top of the bowl with the lid. Turn until it drops into place.
4. Simply push the top button to activate the blades. Keep it pressed to blend the food. Do not keep the top button pressed for more than 30 seconds. If it is operated for more than 30 seconds let the unit cool down for at least 2 minutes before operating it again.
5. Make sure that the blade has stopped turning completely before removing the lid. Unplug the unit, remove the lid and remove the blender blade. Carefully pull the knife blade straight up. Empty the food from the bowl. Do not use the food blender bowl for storing food.
How to use
With the Tommee Tippee Quick-Chop electric mini food chopper, you can prepare healthy, homemade and nutritious meals for your little one with minimal mess and maximum ease.
Featuring a 200W motor, 3 strong stainless steel blades and a 500ml capacity bowl, you can quickly and easily chop, blend, purée, mix and mince ingredients such as fish, meat, fruit and vegetables.
The unit is intended for blending pre-cooked ingredients, liquids and soft fruits. The unit is not designed to blend hard ingredients such as ice cubes.
WARNING! After operating 4 cycles, let it cool down to room temperature before operating it again. Keep hands and utensils away from the cutting blade while chopping food.
Make sure you fill the bowl up to ‘200ml’ line, or follow the table below for recommended portions to avoid overfilling:
Ingredients
Quantity
Remark
Pork
150g
Remove peel & bones, cut into small pieces
Beef
150g
Remove peel & bones, cut into small pieces
Onion
200g
Cut into pieces
Garlic
200g
Green Pepper (fresh)
200g
Cut into 4 cms pieces
Carrot (with a little water)
250g
Remove peel, cut into 2x2cms pieces
Tomato
200g
Cut into four pieces
Vegetables
200g
Cut into 3cms pieces
Potato
200g
Remove peel and cooked
Note:
If the food is too large, please cut it into smaller pieces first.
For meat, please remove peel and bones first before chopping.
Please put in the right amount of food each time.
If some ingredients adhere to the glass bowl during chopping, please stop and unplug the appliance first, then use a spatula to scrape off the ingredients before chopping again.
Looking after your Quick Chop Mini Food Blender will help ensure you get the most out of it and make sure it’s always ready to help you make food for baby.
Always disconnect the appliance from the electricity supply if it’s left unattended and before assembling, disassembling or cleaning. And switch off the appliance and disconnect from supply before changing accessories or touching parts that move when the blender is in use.
Guidance on how to clean and maintain your blender:
Allow to cool before putting on or taking off parts and after every use wash the bowl, silicone seal and bowl lid in warm soapy water or use a dishwasher (top shelf only) and dry thoroughly.
Wash the knife blade in warm soapy water and dry thoroughly.
The knife blade is not dishwasher safe.
Wipe the motor unit with a damp cloth but DO NOT IMMERSE IN WATER.
How often should I clean my blender?
Before first use and after every use, wash the bowl, lid and knife blade in warm soapy water and dry thoroughly.
We’ve prepared some common questions and top tips to help you with your new Quick Chop Mini Blender.
What should I do if my blender stops working?
We’ve prepared some common questions and top tips to help you with your new Quick Chop Mini Blender.
There are a few reasons as to why your blender could have stopped working. Please follow our guidance on how to troubleshoot your blender should any of the below occur:
Problem
Possible cause
Solution
The appliance does not work.
The appliance is not plugged in.
Plug the unit into the power socket.
The main body is not installed properly.
Make sure the grooves on the bottom of main body match protruding ribs of bowl cover.
Abnormal vibration/ Loud noise
The blade is not installed properly.
Remove the ingredients and install the blade properly.
The appliance is not placed on a flat surface.
Place the appliance on a flat surface.
Too many ingredients.
Turn off the switch. Disconnect the power supply and remove the excess ingredients.
The voltage is too high.
Check whether the voltage is too high.
Suddenly stop during use
Motor overheat protection
Rest for 20~30 minutes before use again
The voltage is too low.
Check whether the voltage is too low.
Blade stuck
Put in too many ingredients.
Turn off the switch. Disconnect the power supply and remove the excess ingredients.
The voltage is too low.
Check whether the voltage is too low.
If you’re still experiencing issues, please contact us here.
How long should I blend certain foods for?
The unit is intended for blending pre-cooked ingredients, blending liquids and soft fruits. The unit is not designed to blend hard ingredients such as ice cubes.
WARNING! After operating 4 cycles (each cycle is 30 seconds), let it cool down to room temperature before operating it again.
Keep hands and utensils away from the cutting blade while chopping food.
INGREDIENTS
RECOMMENDED QTY.
PREP
BLENDING TIMES
Carrot
200 grs (20mmx20mm)
Add 20 ml of water to blend smoothly
30 seconds
Broccoli
200 grs (15mmx15mm)
Cut into small pieces
15 seconds
Courgette
200 grs (15mmx15mm)
Cut into small pieces
15 seconds
Pumpkin
200 grs (15mmx15mm)
Cut into small pieces
15 seconds
Tomatoes
150 grs
1 or 2 cut into four pieces
15 seconds
Beef
200 grs
Cut into small pieces and make sure bones have been removed
30 seconds
Chicken
200 grs
30 seconds
Pork
170 grs
30 seconds
How much food can go in the blender at one time?
To prevent the content to overflow, make sure to fill the bowl up to ‘200ml’ line or follow the table below for recommended portions:
Ingredients
Quantity
Remark
Pork
150g
Remove peel & bones, cut into small pieces
Beef
150g
Remove peel & bones, cut into small pieces
Onion
200g
Cut into pieces
Garlic
200g
Green Pepper (fresh)
200g
Cut into 4 cms pieces
Carrot (with a little water)
250g
Remove peel, cut into 2x2cms pieces
Tomato
200g
Cut into four pieces
Vegetables
200g
Cut into 3cms pieces
Potato
200g
Remove peel and cooked
Note:
If the food is too large, please cut it into smaller pieces first.
For meat, please remove peel and bones first before chopping.
Please put in the right amount of food each time.
If some ingredients adhere to the glass bowl during chopping, please stop and unplug the appliance first, then use a spatula to scrape off the ingredients before chopping again.
This product is covered by our exclusive two-year warranty when you buy directly from us! For full terms and conditions, please click here.
What is covered?
Any defect due to faulty materials or workmanship which occurs while the Product is covered by this Warranty.
What is not covered?
This Warranty does not cover wilful damage, negligence or minor cosmetic damage caused by fair wear and tear.
How long are Products covered?
This Warranty covers Products for two years from the date of purchase.
We will keep a record of when you purchased your Product in your Tommee Tippee account, there is no need to register.
What if I bought my product elsewhere?
If you have purchased any Tommee Tippee items from another retailer, online or in-store, you should address any issues you have to that retailer or website in the first instance. Your statutory rights are against the retailer that sold you the Product.
What if it has been longer than two years from purchase of the Product?
This Warranty only covers Products for two years from the date of purchase. Do not worry if a defect occurs after this time, we still want to help, so please contact us in the same way you would if you were making a claim.
